Eagle Tug Engine CAN Fault Light - Troubleshooting

Eagle TT Relays

Look for the “Main” relay located behind the engine. These are taped up to the wire harness. Look for proper connection, water, or even green fuzz. You can even swap the main relay and the Actuator relay locations to see if the problem goes away.

There will be a socket labeled “SUB RELAY” that is open and without a relay inserted. This is correct and not missing.

The above are the part numbers for the relays in case they are needed to be replaced

PN on Relays:

198461-52950 - x2

129927-77920 - x2


Did this help answer your question?

thumbs up
thumbs down

Thanks for the feedback! 🙏🏽